At present, there are many types of roller skates on the market, which can be roughly single-row or multi-row. Among them, multi-row roller skates are popular with girls and beginners, because multiple rows of pulleys are not easy to fall when standing. As far as the current multi-row roller skates are concerned, the structure includes the shoe body, the wheel frame installed at the bottom of the shoe body, and the pulley on the wheel frame. The wheel shaft and the shaft frame of the pulley here are fixed vertically. The human body is not easy to side, and it is difficult to make corners. It is easy for the human body to lean on the single-row roller skates, which leaves a pity on the multi-row roller skates. And as for the current roller skates, whether it is single row or multiple rows, the shoes and the pulley are integrated, which is inconvenient to carry. The other is that compared with those hidden pulley type roller skates, the structure of this kind of pulley is relatively more. Fixed and cannot be used as ordinary flat shoes. Rollerblades and roller skating manufacturers come to share the specific content with you!
The utility model is characterized in that it comprises a sliding plate fixed to the sole and composed of roller skates matched with the sliding plate; the two sides of the sliding plate in the longitudinal direction extend outward to form a sliding rail groove with a hook at the end, slidingly inserted in front of the sliding rail groove There is a pressable elastic button on the end surface of the board, and a barrier is provided along the side of the sliding board behind the slide rail groove; the roller skating is composed of a wheel frame and a pulley, and the top of the wheel frame is a sliding board set on the sliding board. Slides with matching rail grooves. The slides perpendicular to the two sides of the slide are provided with perforated hangers. A hollow shaft is erected between the two perforations. Both ends of the hollow shaft are respectively sleeved to provide support for the pulley and wheel shaft. The wheel shaft sleeves are provided with supporting plates on both sides.
A shock-absorbing spring is rigidly arranged between the support plate and the sliding plate, the part where the pulley axle is supported by the axle sleeve is also sleeved with spacers, and a hook with hooks at both ends and hooked on the pulley axle is set in the hollow Axis. The sleeve body of the wheel axle sleeve that provides support for the pulley axle is formed by a bent piece with a hole perpendicular to the axle axis extending from the side of the support plate, and the bent piece and the support plate are manufactured integrally or formed by welding. The two ends of the damping spring are fixedly provided with spring seats corresponding to the sliding plate and the supporting plate.
